~ Where passion meets precision · Atelier Haarlem since 2010 ~
LED headlamps use electronic drivers that generate high-frequency switching currents. These electromagnetic emissions can couple into your motorcycle's radio antenna and wiring, causing static, noise, or signal loss. This is a common issue with aftermarket LED upgrades, especially on touring models with integrated radio systems.
The MCS filter is designed as a universal wiring terminal for most 12V LED headlamp systems. However, it works optimally with rear-mounted antenna systems. If your motorcycle has a fairing-mounted antenna positioned close to the LED driver, you may experience reduced effectiveness. We recommend checking antenna placement before installation.
Installation is straightforward: disconnect your LED headlamp's wiring connector. Plug the MCS filter terminal between the wiring harness and the LED headlamp connector. Reconnect and test your radio. No soldering, splicing, or modifications to your motorcycle's wiring are required. The entire process takes just a few minutes.
No. The MCS filter is purely a noise suppression device that works at the electromagnetic level. It does not alter voltage, current, or light output to your LED headlamp. Your headlamp will operate exactly as designed while your radio interference is eliminated.
Yes, the MCS filter is specifically designed for touring models, which typically feature integrated radio systems and rear-mounted antennas. If your touring motorcycle has a rear antenna and a recently installed LED headlamp causing radio problems, this filter is an ideal solution.
The MCS filter is rated for 12V systems, which covers the vast majority of motorcycles including modern tourers, cruisers, and custom builds. If your motorcycle operates on a different voltage system, please verify compatibility before purchasing.
Yes, antenna placement is important. The MCS filter performs best with rear-mounted antennas positioned away from the LED driver unit. Fairing-mounted antennas that sit very close to the LED driver may not achieve optimal noise suppression. Rear-mounted or frame-mounted antennas are recommended for best results.
More questions? View all FAQs
Upgrading your motorcycle with a modern LED headlamp unit offers superior brightness and style, but it can sometimes introduce unwanted radio interference that disrupts your audio experience. The MCS LED Headlamp Radio Interference Eliminator is a plug-and-play solution designed to eliminate electromagnetic noise caused by LED driver units, restoring crystal-clear radio reception on your touring motorcycle.
This universal wiring terminal installs directly between your motorcycle's wiring harness and LED headlamp, acting as a noise suppression filter. It's engineered specifically for rear-mounted antenna systems and is ideal for touring models where radio quality matters.
Simply connect the eliminator into your circuit—no modifications or special tools required. Note that fairing-mounted antennas may be positioned too close to the LED driver for optimal performance.
Whether you're riding a classic BMW, a cafe racer, or any touring-spec motorcycle, this eliminator ensures your LED headlamp upgrade doesn't compromise your radio reception. It's a small investment that makes a significant difference in your riding comfort and enjoyment.
Upgrading your motorcycle with a modern LED headlamp unit offers superior brightness and style, but it can sometimes introduce unwanted radio interference that disrupts your audio experience. The MCS LED Headlamp Radio Interference Eliminator is a plug-and-play solution designed to eliminate electromagnetic noise caused by LED driver units, restoring crystal-clear radio reception on your touring motorcycle.
This universal wiring terminal installs directly between your motorcycle's wiring harness and LED headlamp, acting as a noise suppression filter. It's engineered specifically for rear-mounted antenna systems and is ideal for touring models where radio quality matters.
Simply connect the eliminator into your circuit—no modifications or special tools required. Note that fairing-mounted antennas may be positioned too close to the LED driver for optimal performance.
Whether you're riding a classic BMW, a cafe racer, or any touring-spec motorcycle, this eliminator ensures your LED headlamp upgrade doesn't compromise your radio reception. It's a small investment that makes a significant difference in your riding comfort and enjoyment.
Delivery time: 3–5 business days
Be the first to review this product
