~ Where passion meets precision · Atelier Haarlem since 2010 ~
LED turn signals draw significantly less power than traditional incandescent bulbs. Your motorcycle's Turn Signal Module (TSM) is calibrated for the higher amperage of standard bulbs. Without a load equalizer, the TSM may not recognize the LEDs as properly installed, causing hyper-flashing (rapid blinking) or triggering error codes. The load equalizer provides the electrical resistance your TSM expects, maintaining normal operation.
Yes, the Cycle Visions Load Equalizer is designed to work with 12V motorcycle electrical systems, including classic and modern BMW motorcycles. However, we recommend verifying your specific model's TSM specifications before installation. If you're unsure about compatibility with your exact motorcycle model, contact our support team for guidance.
The Cycle Visions Load Equalizer features a plug-and-play design, making installation straightforward. Typically, it's wired in-line with your turn signal circuit. Detailed installation instructions are included with the product. If you're uncomfortable with electrical work, we recommend having a qualified mechanic or custom builder install it to ensure proper wiring and safety.
The load equalizer is specifically designed for turn signal circuits. If you're making other LED upgrades (headlight, tail light, etc.), each circuit may require its own solution depending on your TSM and electrical system. Some upgrades may not need a load equalizer at all. We recommend consulting with a motorcycle electrician to evaluate your complete lighting upgrade plan.
The Cycle Visions Load Equalizer is designed for 12V motorcycle electrical systems, which is the standard for most modern and classic motorcycles. If your motorcycle operates on a 6V system, this product is not suitable. Always verify your motorcycle's electrical voltage before purchasing.
No, the load equalizer does not dim or affect the brightness of your LED turn signals. It works in parallel with your lighting circuit to provide the correct electrical load for your TSM, without impacting the actual light output. Your LEDs will maintain their full brightness and visibility.
Professional installation is not strictly required if you have experience with motorcycle electrical systems, but it is highly recommended. Improper wiring can damage your motorcycle's electrical system or create safety hazards. For your own safety and to protect your investment, we recommend having a qualified technician or experienced custom builder perform the installation.
The load equalizer should be mounted in a safe, accessible location within your wiring harness or electrical compartment. Common placements include under the seat, in the headlight bucket, or along the frame rails—anywhere that keeps it protected from moisture and heat. Consult the included installation guide for specific recommendations based on your motorcycle model.
More questions? View all FAQs
The Cycle Visions Load Equalizer for TSM is an essential component for riders upgrading to LED turn signals on their motorcycle. When installing modern LED turn signals with lower amperage draw, your stock Turn Signal Module (TSM) may experience compatibility issues, resulting in hyper-flashing or module errors.
This load equalizer solves that problem by providing the correct electrical load that your TSM expects, ensuring smooth, reliable operation of your turn signal system.
Designed for custom motorcycle builders and enthusiasts working on classic bikes, cafe racers, and BMW motorcycles, this device maintains full compatibility with your existing wiring harness while allowing you to enjoy the benefits of LED lighting—including improved visibility, longevity, and aesthetic appeal.
Installation is straightforward, making it an ideal solution for both professional builders and DIY customizers.
Trust Cycle Visions' proven engineering to keep your electrical system working flawlessly during your custom build. Whether you're upgrading a BMW K100, crafting a cafe racer, or restoring a classic machine, this load equalizer ensures your turn signals function exactly as intended.
The Cycle Visions Load Equalizer for TSM is an essential component for riders upgrading to LED turn signals on their motorcycle. When installing modern LED turn signals with lower amperage draw, your stock Turn Signal Module (TSM) may experience compatibility issues, resulting in hyper-flashing or module errors.
This load equalizer solves that problem by providing the correct electrical load that your TSM expects, ensuring smooth, reliable operation of your turn signal system.
Designed for custom motorcycle builders and enthusiasts working on classic bikes, cafe racers, and BMW motorcycles, this device maintains full compatibility with your existing wiring harness while allowing you to enjoy the benefits of LED lighting—including improved visibility, longevity, and aesthetic appeal.
Installation is straightforward, making it an ideal solution for both professional builders and DIY customizers.
Trust Cycle Visions' proven engineering to keep your electrical system working flawlessly during your custom build. Whether you're upgrading a BMW K100, crafting a cafe racer, or restoring a classic machine, this load equalizer ensures your turn signals function exactly as intended.
Delivery time: 3–5 business days
Be the first to review this product
