~ Where passion meets precision · Atelier Haarlem since 2010 ~
Yes, the Custom Dynamics TSM3 is a direct plug-and-play replacement for OEM Harley-Davidson turn signal modules including part numbers 68921-07, 68925-07 (US & HDI/EU models), and 69976-08. Installation requires no additional wiring or modifications.
Absolutely. The TSM3 is fully compatible with both LED and incandescent bulbs, supporting signal loads from 0.24A to 6A per side. It works seamlessly with BCM-compliant LED upgrades without requiring an additional load equalizer.
No. The TSM3 operates solely as a Turn Signal Module (TSM) and does not support the additional security features of the TSSM (Turn Signal Security Module). It will not replace factory alarm functionality, but it does maintain essential safety switch integration to prevent starting in gear without the clutch engaged.
The TSM3 includes a built-in 45-degree tilt sensor that automatically shuts off turn signals when your motorcycle leans beyond 45 degrees for more than one second. This prevents unwanted signaling during aggressive cornering and adds an extra safety layer during storage or transport.
The TSM3 uses intelligent self-canceling technology that turns off turn signals automatically based on three factors: vehicle speed, elapsed time, and direction change. Additionally, the four-way hazard operation includes smart cancellation based on timing, ignition position, and battery voltage, ensuring signals cancel appropriately without driver intervention.
The TSM3 operates reliably between 11VDC and 15VDC, covering standard motorcycle charging systems. It is designed for low current consumption and includes built-in short-circuit and overcurrent protection on all turn signal circuits.
Yes, installation instructions are included with the TSM3. As a direct plug-and-play replacement, installation is straightforward. The module supports OEM TSM manual password learning and the TechnoResearch module replacement procedure for seamless integration.
The TSM3 is compatible with 07-10 Softail models, 07-11 Dyna models, and 07-17 V-Rod (NU) models. Check your specific year and model against these ranges. If you own a 2008 Softail or 2010 Dyna, you're covered. For a 2015 V-Rod, compatibility falls within the 07-17 range.
More questions? View all FAQs
The Custom Dynamics Smart Turn Signal Module TSM3 is a direct plug-and-play replacement for OEM Harley-Davidson turn signal modules, designed for riders who demand reliability and modern functionality in their classic builds. This intelligent module seamlessly integrates with your motorcycle's existing safety switches, preventing accidental starts in gear without the clutch engaged—a critical safety feature for any rider.
Built with advanced smart-canceling technology, the TSM3 automatically cancels turn signals based on speed, time, and direction, while the four-way hazard system intelligently responds to timing, ignition position, and battery voltage. A protective 45-degree tilt sensor automatically disengages the turn signals when your bike leans too far, adding an extra layer of safety during aggressive cornering or storage.
The module operates flawlessly with both LED and incandescent bulbs, supporting signal loads from 0.24A to 6A per side, making it fully compatible with modern BCM-compliant LED upgrades without requiring additional load equalizers.
Engineered for durability and efficiency, the TSM3 features robust, high-quality components with built-in short-circuit and overcurrent protection on all turn signal circuits. Installation is straightforward with included instructions, and the module supports OEM TSM manual password learning and TechnoResearch replacement procedures for hassle-free programming.
The Custom Dynamics Smart Turn Signal Module TSM3 is a direct plug-and-play replacement for OEM Harley-Davidson turn signal modules, designed for riders who demand reliability and modern functionality in their classic builds. This intelligent module seamlessly integrates with your motorcycle's existing safety switches, preventing accidental starts in gear without the clutch engaged—a critical safety feature for any rider.
Built with advanced smart-canceling technology, the TSM3 automatically cancels turn signals based on speed, time, and direction, while the four-way hazard system intelligently responds to timing, ignition position, and battery voltage. A protective 45-degree tilt sensor automatically disengages the turn signals when your bike leans too far, adding an extra layer of safety during aggressive cornering or storage.
The module operates flawlessly with both LED and incandescent bulbs, supporting signal loads from 0.24A to 6A per side, making it fully compatible with modern BCM-compliant LED upgrades without requiring additional load equalizers.
Engineered for durability and efficiency, the TSM3 features robust, high-quality components with built-in short-circuit and overcurrent protection on all turn signal circuits. Installation is straightforward with included instructions, and the module supports OEM TSM manual password learning and TechnoResearch replacement procedures for hassle-free programming.
Delivery time: 3–5 business days
Be the first to review this product
