~ Where passion meets precision · Atelier Haarlem since 2010 ~
Yes, the TSM-2 is fully compatible with both LED and incandescent bulbs. It supports LED loads from 0.24A to 6A per side and works with BCM-compliant LED upgrades without requiring an additional load equalizer.
The TSM-2 replaces OEM TSM (Turn Signal Module) 68921-01 and TSSM (Turn Signal Security Module) models 68923-00 (US models) and 68925-00 (HDI/EU models). Note: It functions as a TSM only and does not support TSSM factory alarm features.
No load equalizer is required. The TSM-2 is compatible with BCM-compliant LED upgrades and handles the full load range of 0.24A to 6A per side without additional components.
The TSM-2 features intelligent auto-canceling based on three factors: speed detection, time elapsed, and direction change. The module automatically deactivates your turn signals when riding conditions suggest they should be off, reducing manual intervention.
The built-in tilt protection automatically shuts off the module if your motorcycle leans beyond 45 degrees for more than one second. This prevents signal malfunction during cornering and adds an extra safety layer.
The TSM-2 is a plug-and-play replacement with included installation instructions. For most 01-06 Softail and 04-06 Dyna models, manual module pairing is possible. However, some models require a TechnoResearch diagnostic tool for TSSM module replacement procedures.
Yes, the TSM-2 supports OEM TSM manual password learning compatibility. It also supports TechnoResearch diagnostic tool programming for advanced module replacement procedures on compatible models.
The TSM-2 includes built-in short circuit and overcurrent protection to safeguard your motorcycle's electrical system. This prevents damage from wiring mistakes or component failures during installation and normal operation.
More questions? View all FAQs
The Custom Dynamics Smart Turn Signal Module TSM-2 is a premium direct plug-and-play replacement for OEM Harley-Davidson turn signal modules. Designed for riders who demand modern LED compatibility without compromising on functionality, this intelligent module replaces factory TSM (Turn Signal Module) 68921-01 and TSSM (Turn Signal Security Module) variants for 01-06 Softail and 04-06 Dyna models.
Whether you're upgrading to LED lighting or maintaining your classic incandescent setup, the TSM-2 delivers reliable performance with advanced smart cancellation features.
Built with professional-grade electronics, the TSM-2 supports turn signal loads from 0.24A to 6A per side, eliminating the need for additional load equalizers when using BCM-compliant LED upgrades. The module features manual and automatic self-canceling turn signals based on speed, time, and direction detection, ensuring your signals don't stay on longer than needed.
Four-way hazard operation includes intelligent cancellation logic based on timing, ignition position, and battery voltage for maximum safety and convenience.
Installation is straightforward with included instructions and full OEM manual password learning compatibility. For enhanced control, the TSM-2 supports TechnoResearch diagnostic tool programming for advanced module replacement procedures. A built-in safety feature auto-disables the module if your motorcycle tilts beyond 45 degrees for more than one second, while short circuit and overcurrent protection safeguard your electrical system during installation and operation.
The Custom Dynamics Smart Turn Signal Module TSM-2 is a premium direct plug-and-play replacement for OEM Harley-Davidson turn signal modules. Designed for riders who demand modern LED compatibility without compromising on functionality, this intelligent module replaces factory TSM (Turn Signal Module) 68921-01 and TSSM (Turn Signal Security Module) variants for 01-06 Softail and 04-06 Dyna models.
Whether you're upgrading to LED lighting or maintaining your classic incandescent setup, the TSM-2 delivers reliable performance with advanced smart cancellation features.
Built with professional-grade electronics, the TSM-2 supports turn signal loads from 0.24A to 6A per side, eliminating the need for additional load equalizers when using BCM-compliant LED upgrades. The module features manual and automatic self-canceling turn signals based on speed, time, and direction detection, ensuring your signals don't stay on longer than needed.
Four-way hazard operation includes intelligent cancellation logic based on timing, ignition position, and battery voltage for maximum safety and convenience.
Installation is straightforward with included instructions and full OEM manual password learning compatibility. For enhanced control, the TSM-2 supports TechnoResearch diagnostic tool programming for advanced module replacement procedures. A built-in safety feature auto-disables the module if your motorcycle tilts beyond 45 degrees for more than one second, while short circuit and overcurrent protection safeguard your electrical system during installation and operation.
Delivery time: 3–5 business days
Be the first to review this product
