~ Where passion meets precision  ·  Haarlem since 2010 ~

Café racer configurator: design your own BMW

Design your own motorcycle on a BMW from the K-series. Choose your style, colour and details. The studio image shows a K100 as the base, your build can also be a K75 or K1100. Request a quote with it straight away.

Six steps, a few minutes. You see your price straight away.

Example in your colour. Your studio image follows all your choices.
Example in your colour. Your studio image follows all your choices.

Your build is 0% complete

0%

All amounts are surcharges including parts, fitting and VAT.

Build level Make your choice

  • Basic

    Suggestion

    Included in the base price

    For riders who want the custom look at the sharpest price, on a donor in good condition.

    • New seat and tail section in your chosen style
    • New handlebar, simple speedometer and LED headlight
    See what is included (2 more)
    • Tank and tail painted in your colour
    • Basic service: oil, filter and a safety check
  • Essential

    + € 1.800

    For riders who want a reliable, road-ready K-series BMW with everything that is really needed.

    Everything from Basic, plus:

    • Good service: oil, filters, plugs, fluids and brake pads
    • New tyres front and rear
    See what is included (2 more)
    • New tail light and simple LED indicators
    • Brakes and bearings checked, delivered road-ready and registered
  • Revised

    + € 6.600

    For riders who want to ride for years without worries, with modern electrics.

    Everything from Essential, plus:

    • Engine revised: seals, gaskets and wear parts renewed
    • Brakes revised: calipers overhauled, new pads and lines
    See what is included (2 more)
    • New, simplified wiring harness with a modern digital control unit
    • Fewer weak spots: old connectors and relays are gone
  • Signature

    + € 14.100

    For riders who want a bike as good as new, at the level of our own signature builds.

    Everything from Revised, plus:

    • Full revision of engine, gearbox and final drive
    • Frame stripped, blasted and powder-coated
    See what is included (2 more)
    • All bearings, bushes and rubbers new
    • Fork overhauled and stainless fasteners where visible

Concept price€7,800 to €8,750

About the configurator

Your custom BMW from the K-series, on screen first

With the configurator you design your own custom BMW from the K-series: a K75, K100 or K1100, as a café racer, brat or scrambler. You choose the build level, the colour and the parts. With every choice you see what it does to the price, calculated with the real prices from our shop.

When you are done, you create a studio image of your build. That image shows a K100 as the base, your build can also be a K75 or K1100. Like it? Then request a quote. We build it in our own workshop, by hand and without haste. No two alike.

How it works

  1. Choose your build level

    Basic, Essential, Revised or Signature. The level sets most of the price: from a fresh look to a bike that is as good as new.

  2. Choose your style and colour

    Café racer, brat or scrambler. Pick a colour from our signature builds, or your own RAL colour from the colour fan.

  3. Choose your parts

    Seat, handlebar, mirrors, suspension, exhaust, wheels, tyres, lighting and cockpit. Whatever you skip stays on a clean standard.

  4. View your build and request a quote

    You see your concept price, create a studio image and send your request. The final quote follows after inspection of the donor bike.

What does a custom BMW K-series build cost?

A build starts at €7,800 for Basic, including a K-series donor bike in good condition and VAT. Essential starts at €9,600, Revised at €14,400 and Signature at €21,900. On top of that, every part you choose counts at its shop price plus fitting.

The concept price assumes a K-series donor. If it becomes a different donor, such as an R model, we take that into the final quote.

Where does the difference come from? Basic gives your bike a new look: seat, bar, speedo, light and paint. With Signature the engine, gearbox and final drive are fully revised, the frame is powder-coated and every bearing, bush and rubber is new. That is many more hours on the bench.

BMW K75 café racer

The K75 is the three-cylinder of the K-series: lighter and narrower than the K100. A fine base for a compact café racer or brat. The studio image shows a K100, the details of your K75 go into the quote.

BMW K100 café racer

The K100 is the flying brick, with its longitudinal four-cylinder. It is the base of our studio image and of most builds in our atelier. Clean lines, and easy to find as a donor.

BMW K1100 custom

The K1100 is the bigger four-cylinder, with more torque. It often arrives as an RS or LT with a fairing. That comes off, and what remains is a solid base for a custom that wants a little more.

BMW R80 or R100 café racer on request

A boxer from the R-series is built on request, when a good donor bike is available. Own one, or looking for one? Choose it in your request. The concept price applies to the K-series, an R model is priced in the quote.

Frequently asked questions

Which BMW models do you build on?

We build on the BMW K-series: the K75, K100, and K1100. A build on the BMW R-series, such as the R80 or R100, is possible on request, when a good donor bike is available. Later, older models of the BMW GS will follow, such as the R80 G/S or R100 GS.

Is the donor bike included in the price?

Yes. The concept price assumes a BMW from the K-series in good condition as the base, and it is included. Already own a K75, K100, or K1100, or looking for a different donor? Choose it in your request and we take it into the final quote.

How fixed is the price from the configurator?

It is a concept price, not a final quote. The upper end of the range leaves up to 10% room for a disappointing donor and for changing prices of parts, delivery or taxes. Any change is always discussed with you first.

Who builds my bike?

Dapper Motor builds your bike in our own workshop. We first look at your wishes and the donor bike, then decide who does what. Paint, powder coating, upholstery or an engine rebuild sometimes go to a regular specialist, so every part is in the hands of the best craftsman. We stay in charge and check everything before handover. You have one point of contact and one warranty: parts we add carry a 12-month warranty, plus what the quote states for your build level. On the original parts of the old motorcycle itself we give no warranty, but we check them and replace preventively per build level. A custom build is still an older motorcycle: check it before every ride and have it serviced on time. How a build runs, from plan to handover, is set out in our terms for custom builds.

How long does a build take?

Expect 3 to 6 months from the deposit. It depends on your build level, the condition of the donor and setbacks along the way. A Basic takes far fewer hours than a Signature. It is an indication, not a hard deadline. If it runs late, we let you know.

Do you deliver outside the Netherlands?

Yes. Transport is not in the price. We quote it separately, after handover. We are responsible for the shipment until delivery in your country. After that, import duties, inspection and registration are at your expense. We supply the export documents.

I want something the configurator does not offer. Is that possible?

Often it is. A colour of your own comes from the RAL colour fan. Other wishes, such as a special part, go in the remarks field of your request. We take them into the quote.

Does the configurator cost anything?

No. Designing your build and requesting a quote is free and without obligation. For a studio image we ask for your name and email address. You can create three.