~ Where passion meets precision  ·  Haarlem since 2010 ~
Back to overview
BMW Classic Builds

Shocks for the BMW R80 and R100: which one fits your boxer?

Dapper Motor
5 min read
Shocks for the BMW R80 and R100: which one fits your boxer?

Your BMW R80 or R100 still runs, but the rear feels soft. It keeps bouncing after a speed bump and sags with a passenger or luggage. Chances are the shocks have been on there for decades. Before you order anything, you need to know one thing: which rear end your boxer has. Everything depends on it.

This guide is about the R80 and R100 and their relatives. If you are mainly torn between YSS and Hagon as a brand, read YSS or Hagon: which shock suits your motorcycle? first. Here the question is which shock fits which R80 or R100.

Three rear ends, three kinds of shock

In this period BMW built the boxers with three different rear ends. So the name R80 or R100 does not tell you enough. Look at the year and the version.

Twin shocks. The classic boxers have two rear shocks, one on each side of the wheel. That goes for the /5, /6 and /7 and for the R80 and R100 versions up to the mid eighties, such as the R100/7, the R80/7, the R100 RS and the R100 RT. You always replace them as a pair.

Monolever. From the mid eighties many R80 and R100 models got a single sided swingarm with one shock. The R80 G/S already had that layout from 1980. Examples are the R80 Monolever, the R80 RT Monolever and the R100 RS Monolever. These take a mono shock.

Paralever. The GS models from the late eighties and later the R80 R and R100 R have the Paralever: a swingarm with an extra link that takes up the reaction of the shaft drive. There is one shock here too, but a different one from the Monolever. Think of the R100 GS Paralever, the R80 GS Paralever and the R100 R Paralever.

So your bike decides the type, not your preference. You cannot simply put a mono shock on a twin shock boxer. That is a frame and swingarm conversion, not a shock replacement.

Lengths per rear end

You measure length from the centre of one mounting eye to the centre of the other. In our range for these models you will roughly see this:

  • Twin shocks for the R80 and R100 with two shocks: 330 or 340 mm. The older /5 and smaller boxers like the R45 and R65 are around 320 mm.
  • Monolever: 410 mm for most R80 and R100 versions. The shock for the R80 Monolever adjusts from 405 to 415 mm. The R80 G/S is different at 365 mm.
  • Paralever: 475 mm for the R80 R, R100 R and the Classic and Mystic versions. The GS Paralever models use 495 mm.

Those two Paralever lengths show why you should not choose on the name alone. A shock from an R100 GS may bolt on, but it stands 20 mm longer. That changes the ride height at the rear and with it the steering.

The mounts differ too. The twin shocks for the R100 have an eye of 10 by 22 mm top and bottom. The mono shock for the R80 Monolever uses 15.1 by 22 mm. Every product page lists the eye sizes. Check them against your current shock.

Original, YSS or Hagon

Original. The shocks BMW fitted back then were good for their time. But even a good shock wears. Damping fades slowly, so you only notice once you have ridden a new one. Buying a used original shock is a gamble: you do not know how much life is left. If you want to keep the bike as original as possible, choose a replacement with a classic look, for example with a chrome body.

YSS. For almost every R80 and R100 there is a YSS shock in the shop that is matched to that model. With the twin shocks you choose from several series and finishes: chrome, aluminium or black, with a black or chrome spring. The series differ in build and adjustment. The product page shows per shock what you can adjust and whether it comes with an ABE. See the full range on the YSS for BMW page.

Hagon. Hagon builds to order. For the /5, /6 and /7 there is a pair of Roadshock twin shocks with adjustable spring preload. For the R80 Monolever and the R100 GS there are Hagon mono shocks. If you want a different length or a spring for your weight, you build the shock yourself. That works for the twin shock boxers, the R80 Monolever and the R100 GS. You get a price within two working days. See Hagon for BMW.

Which of the two suits you depends on how you ride and what you want to adjust. That choice is covered in detail in the YSS and Hagon comparison.

Lower or higher for a cafe racer or bobber

Many R80 and R100 bikes get converted. A cafe racer or bobber often gets a different seat and sometimes a different ride height at the rear. That is possible, but keep the effects in mind.

A shorter shock lowers the rear. The bike then turns in a bit slower and you have less ground clearance. The side stand can also end up different, so the bike stands more upright or leans further over. A longer shock does the opposite: the bike steers sharper, but can get less settled at high speed.

So stay close to the original length, unless you deliberately want something else. Some YSS shocks have a few millimetres of length adjustment. With Hagon you choose standard, lowered or your own length. If in doubt, ask us before you order.

Do not forget the front

New rear shocks with a tired fork gives an uneven balance. The bike then rides over a bump neatly at the rear, but still dives deep at the front. For many of these models the model page also lists springs and parts for the fork. If you are doing maintenance anyway, sort front and rear in one go.

How to order the right shock

  1. Find your model on the shock absorber page. Pick make, model and year, and you only see what fits.
  2. Check whether your bike has twin shocks or a mono shock. The twin shocks and mono shocks pages show the difference.
  3. Measure your current shock with the measuring guide. Length, top and bottom eyes.
  4. Check the ABE status on the product page if you ride or register the bike in Germany.

Want to see YSS and Hagon for your bike side by side? Use the shock configurator. Not sure which version you have? Send us your year and frame number and we will take a look.

Frequently asked questions

Can I fit twin shocks to a Monolever or Paralever?+

Not without a conversion. The swingarm decides the type of shock. Going from twin shocks to a mono shock or the other way round needs changes to frame and swingarm.

Does the shock from an R100 GS fit my R100 R?+

Both have a Paralever, but the length differs. In our range the GS shock is 495 mm and the R100 R shock 475 mm. Choose the shock for your version.

How do I know which R80 or R100 version I have?+

Check the year on your registration papers and count the rear shocks. Still unsure? Send us your year and frame number and we will look up the right shock.

Should I also do the fork when I fit new rear shocks?+

You do not have to, but it rides better. A fresh rear with a tired fork gives an uneven balance. The model page also shows springs and parts for the front.

Ready to build your dream motorcycle?

Get in touch for a free consultation