~ Where passion meets precision  ·  Haarlem since 2010 ~
Back to overview
BMW Classic Builds

Monoshock conversion for the BMW K series: what it really means

Dapper Motor
5 min read
Monoshock conversion for the BMW K series: what it really means

You search for "monoshock conversion" for your K100 and find all sorts of things. Much of it does not apply to a K. The K75, K100 and K1100 already have a single rear shock from the factory, on a single sided swingarm: Monolever on the K75 and K100, Paralever on the K1, K100 RS 16V and K1100. So there is nothing to convert from two shocks to one.

What builders do mean by a conversion: mounting the shock differently, making it shorter, or replacing it with a shock that suits a cafe racer or custom build. Here you read which routes there are, what they take and when it is worth it.

What is under your K now

One rear shock, and the right length depends on the model. The shocks in the shop for the K75 and K100 are 350 mm. For the K100 RS 16V, K1100 and K1 that is 385 mm. There is also a shorter one of 305 mm, for builds where the rear comes down.

Pick your model on the shock absorber page and you only see what fits. Straight to your model: K75, K100, K100 RS 16V or K1100 RS.

Most K models are thirty years old or more. If the original shock is still on the bike, it is almost certainly worn out. That is often the real reason to look at the rear. The conversion comes after that.

Three routes for a K series build

1. A new shock at standard length

The simplest route. The geometry stays as BMW intended it. You replace the old shock with a YSS that is listed for your model. There are several series, such as ME302, MZ366 and MG366. They differ in what you can adjust. The product page shows what each shock lets you adjust.

This suits a K you ride as it is. Or a build where the rear keeps its height.

2. A shorter shock

On many cafe racer builds the rear comes down. For that there is a YSS MZ366 of 305 mm for the K75, K100, K100 RS 16V and K1100. Hagon also has a lowered monoshock for the K series, the Mono J.

A shorter shock changes more than the height. The bike sits differently, the side stand leans further and you have less ground clearance. Also check that the wheel stays clear of the mudguard and frame with the shock fully compressed. That work comes with this choice.

3. A link kit with its own shock

The most far reaching route. The SideWinder Meccanica conversion kit is a link system with a custom built YSS Topline Z shock. It is adjustable for spring preload and rebound damping. The link system runs on spherical bearings and uses the standard BMW mounting point at the rear. The kit is available for the K75, K100, K100 RS 16V and K1100, and is meant for cafe racer and custom builds.

Here you change how the shock is mounted, not only which shock it is. That takes more measuring and fitting than swapping a shock. If you are not sure, have it done by someone who builds K models.

When is it worth the investment

That depends on what you are building.

  • You ride your K the way BMW made it and the shock is worn: choose route 1. The most effect for the smallest change.
  • You are building a cafe racer with a lower rear: route 2. Or route 3 if the rear of the bike is being reworked anyway.
  • You want the shock set up for your weight and riding style: look at a made to measure Hagon.

A conversion that does not suit the build does not make the bike better. A K on a good new shock often rides better than a half finished conversion. Start with what you want to achieve, not with the part.

YSS or Hagon

That choice is separate from the conversion. How to choose between the two is in YSS or Hagon. For the K100 specifically there is YSS and Hagon on the K100.

In short: you choose YSS from the range for your model. You build Hagon around your weight, riding style and length. The shock configurator shows both side by side. A Hagon is built to order. You get a price within two working days.

All mono shocks are also listed together under mono shocks.

Do not forget the front

If the rear comes down or gets firmer, the balance of the bike changes. A new rear shock on a tired old fork feels lopsided. For the K series there are progressive fork springs from Wirth. You find them on the model page for your bike.

Approval and paperwork

How strict the rules are depends on your country and on what you change. A different shock is not the same as a modified frame. Check this before you start, not afterwards.

In Germany the ABE matters. The product page shows whether there is one. If nothing is shown, the status is not confirmed yet.

Measure before you order

Measure the length from the centre of one mounting eye to the centre of the other, preferably on the shock that is on the bike now. Also check the top and bottom mounts. The measuring guide shows how.

If you go for a shorter shock, also measure how much room is left when the rear is fully compressed. That is safest to measure without spring pressure on the shock. If you have never done this, have it done by someone who does it more often.

How to go about it

Pick your model on the shock absorber page and check which length belongs under it as standard. Then decide whether your build needs a shock at standard length, a shorter shock or a link kit. Not sure? Send us your model and what you want to build. We will think along with you.

Frequently asked questions

Does a BMW K100 have one or two rear shocks?+

One. The K75, K100 and K1100 have a single rear shock from the factory, on a single sided swingarm.

What does a shorter shock do to my K?+

The rear comes down. That changes seat height, ground clearance and the angle of the side stand. Check that the wheel stays clear with the shock fully compressed.

Which K models does the SideWinder Meccanica conversion kit fit?+

It is available for the K75, K100, K100 RS 16V and K1100. At the rear it uses the standard BMW mounting point.

Can I have a Hagon monoshock made to measure for my K series?+

Yes. In the configurator you choose model, weight, riding style and length. Hagon is built to order and you get a price within two working days.

Ready to build your dream motorcycle?

Get in touch for a free consultation